Kia Niro: Front Seat / Front Seat Shield Outer Cover Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Outer Cover Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the front seat assembly.

(Refer to Front Seat - "Front Seat Assembly")

2.

Remove the front seat shield outer cover (A) by using a remover.

  

Correctly remove the front seat shield outer cover to the removal procedure and direction.

Be careful not to damage the mounting bracket and hook when removing the cover.

3.

Disconnect the front seat power switch connector (A).

4.

Install in the reverse order of removal.

  

Make sure the fuel filler door locks/unlocks and opens/closes properly.

Replace any damaged clips.

Front Seat Shield Outer Cover Components and components location
Component Location 1. Front seat shield outer cover ...

Front Seat Shield Inner Cover Components and components location
Component Location 1. Front seat shield inner cover ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Disc Brake Repair procedures
Removal 1. Remove the wheel & tire. 2. Remove the parking brake cable pin (A). 3. Rotates the nut (A) in the counterclockwise direction and then remove the parking cable. 4. ...

Kia Niro 2017 (DE HEV) Service Manual: Front Impact Sensor (FIS) Description and operation
Description • The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indica ...

© 2016-2024 www.kniro.net