Kia Niro: Intake And Exhaust System / Exhaust Manifold Components and components location
| Components |
|
1. Exhaust manifold gasket 2. Exhaust manifold |
3. Exhaust manifold stay 4. Heat protector |
Intake Manifold Repair procedures
Removal and Installation
•
Be sure to read and follow the “General Safety Information and ...
Exhaust Manifold Repair procedures
Removal and Installation
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Front Impact Sensor (FIS) Description and operation
Description
•
The front impact sensor (FIS) is installed in the Front End Module (FEM).
They are remote sensors that detect acceleration due to a collision at its
mounting location. The primary purpose of the Front Impact Sensor (FIS)
is to provide an indica ...
Kia Niro 2017 (DE HEV) Service Manual: Front Door Side Weatherstrip Repair procedures
Replacement
1.
Loosen the front door checker (A) mounting bolt.
Tightening torque :
19.6 - 29.4 N·m (2.0 - 3.0 kgf·m,14.5 - 21.7 lb·ft)
2.
Detach the clips, and then remove the front door side ...
