Kia Niro: Engine And Transaxle Assembly / Engine Mounting Components and components location
| Components |
|
1. Transaxle mounting bracket 2. Roll rod bracket |
3. Engine mounting bracket 4. Engine mounting support bracket |
Engine Room Under Cover Repair procedures
Removal
Engine room under cover.
1.
Remove the engine room under cover (A).
Tightening torque :
3.9 - 5.9 N·m (0.4 - 0.6 kgf·m, 2.9 - 4.3 lb· ...
Engine Mounting Repair procedures
Removal and Installation
Engine Mounting Bracket
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Pre-Charge Relay Description and operation
Description
Built into the Power Relay Assembly (PRA), the Pre-Charge Relay starts to charge
the capacitor of the inverter soon after ignition "ON", then it goes out when the
capacitor has been fully charged.
1. High Voltage Power Terminal (-)
2. Hig ...
Kia Niro 2017 (DE HEV) Service Manual: Safety Plug Description and operation
Description
Safety Plug is installed on the rear side of the high voltage battery and it
can mechanically shut the high voltage circuit off when servicing the high voltage
system (i.e. High Voltage Battery, Power Relay Assembly, HPCU, BMS ECU, Hybrid Drive
Motor, Inverter, HSG, LD ...
