Description |
Crankshaft Position Sensor (CKPS) is one of the most important sensors of the engine control system that detects the crankshaft position. Lack of CKPS signal may cause the engine to stop.
This sensor is installed in ladder frame and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when the engine rotates. The target wheel consists of 58 slots and 2 missing slots on 360 CA (Crank Angle).
Kia Niro (DE HEV) Owners Manual: Notes on the safe use of the Tire Mobility Kit
Park your car at the side of the road so that you can work with the TMK
away from moving traffic. Place your warning triangle in a prominent place to
make passing vehicles aware of your location.
To be sure your vehicle will not move, even when you're on fairly level
ground, always ...
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
The HCU (Hybrid Control Unit) controls whole hybrid systems and is connected
with each control modules (ECM, TCM, MCU, BMS ECU etc.) by CAN interface. In addition
this system uses the brake switch signals for controlling the hybrid system.
& ...