Troubleshooting |
Fault code |
Fail description |
Remedy |
60 |
Compressor CAN signal fault |
1. Check HV, LV connector connection. 2. Check LV connector pin condition. 3. Check vehicle inverter fuse condition. 4. A/C ON then check compressor operation. 5. If it does not operate, replace compressor. |
61 |
Compressor operation state error received |
|
62 |
Low voltage |
1. Check HV connector connection. 2. Check vehicle inverter fuse condition. 3. Check voltage level of high voltage battery. 4. A/C ON then check compressor operation. 5. If it does not operate, replace compressor. |
63 |
High voltage |
1. Identify vehicle model on compressor. 2. Check voltage level of high voltage battery. 3. A/C ON then check compressor operation. 4. If it does not operate, replace compressor. |
65 |
Overheat protection |
1. Check heating object in engine room. 2. Check A/C system for defects. 3. After 20 minutes, IG ON and A/C ON then check compressor operation. 4. If it does not operate, replace compressor. |
67 |
Over current protection |
1. Check cooling fan operation. 2. Check AAF(Active Air Flap) for short circuit. 3. After 20 minutes, IG ON and A/C ON then check compressor operation. 4. If it does not operate, replace compressor. |
69 |
Missed restart |
|
70 |
Over torque protection |
|
71 |
A/C
on Operating Permission Not Received |
1. Check the BMS. 2. Check the high voltage wiring shorted. |
72 |
A/C
Compressor Permission Power Not Received |
|
68 |
Current Measurement Error |
1. If it does not operate, replace compressor. 2. Check vehicle inverter fuse condition. |
78 |
Compressor Interlock Circuit OPEN |
Kia Niro 2017 (DE HEV) Service Manual: Power Relay Assembly (PRA) Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...
Kia Niro 2017 (DE HEV) Service Manual: Crach Pad Center Panel Components and components location
Component Location
1. Crash pad main lower panel
...