Kia Niro: Hybrid Control System / Components and components location

Components Location

1. Hybrid Power Control Unit (HPCU)
2. Hybrid Control Unit (HCU)
3. Brake Switch
4. DC Fuse

  

HPCU includes the HCU (Hybrid Control Unit), Inverters (for Drive Motor, HSG and Electric A/C Compressor), MCU (Motor Control Unit) and LDC (Low DC / DC Converter).

  

For the location of the other control modules, refer to the relevant group.

1. Hybrid Power Control Unit (HPCU)
2. Hybrid Control Unit (HCU)
3. Brake Switch

4. DC Fuse


Hybrid Control System
...

Description and operation
Description The HCU (Hybrid Control Unit) controls whole hybrid systems and is connected with each control modules (ECM, TCM, MCU, BMS ECU etc.) by CAN interface. In addition this sys ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Idler Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") 2. Remove the idler (A). Tightening torque : 39.2 - 49.0 N·m (4.0 - 5.0 kgf·m, 28.9 - 36.2 lb·ft) ...

Kia Niro 2017 (DE HEV) Service Manual: Evaporator Temperature Sensor Description and operation
Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temperature Coefficient (NTC). Elect ...

© 2016-2025 www.kniro.net