Kia Niro: Dual Clutch System / Clutch Engagement Fork and Engagement Bearing Components and components location
| Components |
|
1. Engagement bearing 2 (Even) 2. Engagement bearing 1 (Odd) 3. Engagement bearing sleeve |
4. Engagement fork 1 (Odd) 5. Engagement fork 2 (Even) |
Dual Clutch Assembly Repair procedures
Removal
1.
Remove the hybrid drive motor & dual clutch transmission assembly from
the vehicle.
(Refer to DCT System - "DCT")
2.
...
Clutch Engagement Fork and Engagement Bearing Repair procedures
Removal
1.
Remove the dual clutch assembly.
(Refer to Dual Clutch System - "Dual Clutch Assembly")
2.
Remove the clutch engagement b ...
Other information:
Kia Niro (DE HEV) Owners Manual: Checking the engine oil level
■ Gasoline Engine (Kappa 1.6L-GDI)
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil
to return to the oil pan.
4. Pull the dipstick out, wipe it ...
Kia Niro 2017 (DE HEV) Service Manual: Heated Oxygen Sensor (HO2S) Description and operation
Description
Heated Oxygen Sensor (HO2S), consisting of zirconium and alumina, is installed
on both upstream and downstream of the Manifold Catalytic Converter (MCC) to detect
the air/fuel ratio and send it to the ECM. The sensor output voltage varies in accordance
with the air/fue ...
