Kia Niro: High Voltage Battery Control System / Battery Current Sensor Description and operation
| Description |
Built into the Power Relay Assembly (PRA), the Battery Current Sensor measures the current of the high voltage battery while charging or discharging.
|
1. High Voltage Power Terminal (-) 2. High Voltage Power Terminal (+) 3. Battery Current Sensor 4. Inverter Power Terminal (-) 5. Inverter Power Terminal (+) 6. Pre-Charge Resistor |
7. Main Relay (+) 8. Pre-Charge Relay 9. Main Relay (-) 10. Power Relay Assembly Connector (Battery current sensor signal input) 11. Power Relay Assembly Connector (Main relay control) |
Battery Current Sensor Specifications
Specification
Battery Current Sensor
Item
Output Voltage (V)
Max. Current (A)
-300 (Charge)
0.5
0
...
Battery Current Sensor Schematic diagrams
Circuit Diagram
[B03-C] (Relay Control)
[B03-S] (Relay Control)
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: CVVT Oil Control Valve (OCV) Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is calculated by the engine speed and load.
By controlling CVVT, the valve overlap or underlap occurs, wh ...
Kia Niro 2017 (DE HEV) Service Manual: Hood Insulator Pad Repair procedures
Replacement
1.
Using a clip remover, detach the clips, and remove the hood insulator
pad (A).
Be careful not to damage the hood and body.
...
