Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the glove box housing. (Refer to Body - "Glove Box Housing") |
3. |
Disconnect the VESS unit connector (A).
|
4. |
Remove the VESS unit (A) after loosening the mounting nuts.
|
Installation |
1. |
Install the VESS unit and connecting the connector. |
2. |
Install the glove box housing. |
3. |
Connect the negative (-) battery terminal. |
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
BSD is a system that uses two magnetic wave radar sensors attached on the rear
panel to measure the distance from the vehicle in the back and senses and sets off
(visual and auditory) alarms for any vehicle coming into the blind spot.
–
Blind Spot ...
Kia Niro 2017 (DE HEV) Service Manual: Motor Temperature Sensor Repair procedures
Inspection
Hybrid Drive Motor
1.
Inspect the temperature sensor resistance.
Item
Pin
Specification
Remarks
Resistance
(temperature sensor)
...