Kia Niro: High Voltage Battery Control System / Safety Plug Schematic diagrams
| Circuit Diagram |
Harness Connector
[Interlock]
Safety Plug Description and operation
Description
Safety Plug is installed on the rear side of the high voltage battery and it
can mechanically shut the high voltage circuit off when servicing the high voltage
system (i.e ...
Safety Plug Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” ...
Other information:
Kia Niro (DE HEV) Owners Manual: Operating conditions
The indicator on the switch will illuminate when the Blind spot detection system
switch is pressed with the ignition switch ON. If the vehicle speed exceeds 30 km/h
(18.6 mph), the system will activate.
If you press the switch again, the switch indicator and system will be turned
off.
If t ...
Kia Niro 2017 (DE HEV) Service Manual: Rear Seat Assembly Repair procedures
Replacement
[Rear seat cushion
assembly]
1.
Remove the luggage board (A).
2.
Remove the rear seat cushion (A) after loosening the mounting bolts.
Tightening torque :
16.8 - 25.5 N·m (1.7 - 2.6 kgf·m, 12. ...
