Kia Niro: Body Side Molding / Quarter Garnish Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Using a remover, remove the fender garnish (A).

2.

Install in the reverse order of removal.

  

Replace any damaged clips.

Fender Garnish Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Front Wheel Guard Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Power Window Switch Repair procedures
Inspection [Non-IMS Type] Driver Power Window Switch 1. Disconnect the negative (-) battery terminal. 2. Remove the driver front door trim. (Refer to Body - "Front Door Trim") 3. Disconnect ...

Kia Niro (DE HEV) Owners Manual: Removable towing hook
■ Front ■ Rear 1. Open the tailgate, and remove the towing hook from the tool case. 2. Remove the hole cover pressing the upper (front) / lower (rear) part of the cover on the bumper. 3. Install the towing hook by turning it clockwise into the hole until it is fully secured. 4. Remo ...

© 2016-2024 www.kniro.net