Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front door quadrant inner cover (A).
|
3. |
Disconnect the power door mirror connector from the harness.
|
4. |
Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly. [Mirror Control (LH/RT)]
[BSD Indicator]
[Mirror Heater]
[Side Repeater Lamp]
[Mirror Folding Motor]
|
Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Schematic diagrams
Circuit Diagram
Fail-Safe Mode
Item
Fail-Safe
Output Voltage (V)
12
If the fuel pressure sensor malfunctions, it enters fail safe mode. This
...
Kia Niro (DE HEV) Owners Manual: Checking the engine oil level
■ Gasoline Engine (Kappa 1.6L-GDI)
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil
to return to the oil pan.
4. Pull the dipstick out, wipe it ...