Kia Niro: Front Door / Front Door Trim Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the front door quadrant inner cover (A) by using a remover.

2.

Disconnect the cap (A) after loosening the screw.

3.

Remove the front door trim (A).

4.

Remove the front door inside handle cage (A). Disconnect the IMS connector (B).

5.

Disconnect the power window switch connector (A) and IMS switch connector (B).

6.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Make sure the door locks/unlocks and opens/closes properly.

Replace any damaged clips.

Front Door Trim Components and components location
Component Location 1. Front door trim ...

Front Door Inside Handle Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Motor Control Unit(MCU) Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...

Kia Niro 2017 (DE HEV) Service Manual: Center Pillar Trim Repair procedures
Replacement [Center pillar lower trim]    Put on gloves to protect your hands.    • Use a plastic panel removal to ...

© 2016-2024 www.kniro.net