Kia Niro: Hybrid Motor Assembly / Description and operation
| Description |
| • |
The Hybrid motor system is equipped with two electric motors (HSG, Drive motor). |
| • |
The traction motor operates to move the vehicle and to provide lower Noise, Vibration, Harshness (NVH) during driving and to achieve fuel efficiency. |
| • |
The electric motor takes on the role of a generator during deceleration and braking. |
| • |
The Hybrid Starter Generator (HSG) starts the engine while the vehicle is in motion.
|
Hybrid Drive Motor Assembly Components and components location
Components
1. Dual clutch transmission assembly (DCT)
2. Hybrid drive motor assembly
3. Concentric slave cylinder
4. Engine clutch actuactor assembly ...
Other information:
Kia Niro (DE HEV) Owners Manual: Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when:
1. Moisture is frozen to the sensor. (It will operate normally when the moisture
has been cleared.)
2. The sensor is covered with foreign matter, such as snow or water, or the sensor
cover is blocked. (It will operate normally when ...
Kia Niro 2017 (DE HEV) Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description
Installed on the delivery pipe, the Rail Pressure Sensor (RPS) measures the instantaneous
fuel pressure in the delivery pipe. The sensing element (Semiconductor element)
built in the sensor converts the pressure to voltage signal. By using this signal,
the ECM can cont ...
