Kia Niro: Emission Control System / Description and operation

Description

Emissions Control System consists of three major systems.

The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).

The Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.

The Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.

Components and components location
Components Location 1. PCV Valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel Tank Air Filter 5. Catalytic converter (WCC+UCC) ...

Schematic diagrams
Schematic Diagram ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Sunroof Motor Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly") 3. Remove the glass motor (A) after loosening the mounting screws. ...

Kia Niro 2017 (DE HEV) Service Manual: Variable Force Solenoid (VFS) Description and operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve overlap or underlap occurs, wh ...

© 2016-2024 www.kniro.net